Parts Bench › Parts › 2010 Mazda Mazda3
2010 Mazda Mazda3 parts
Common replacement parts for the 2010 Mazda Mazda3, what usually wears out, a general maintenance schedule, and where to shop. Parts can differ by engine, trim and build date, so confirm fitment with your VIN before you buy.
Shop the 2010 Mazda Mazda3 in the appPopular parts
Brakes
- Front Brake Pads
- Rear Brake Pads
- Front Brake Rotors
- Rear Brake Rotors
- Front Brake Caliper
- Brake Master Cylinder
Ignition & Starting
Electrical & Charging
Cooling
Belts & Pulleys
Engine
Fuel System
Air Intake & Turbo
Maintenance
Exhaust & Emissions
Sensors & Modules
Steering
Suspension
Drivetrain & Axles
Heating & A/C
Lighting
Body & Exterior
General maintenance schedule
These are common starting intervals, not a factory schedule for your engine. Your owner's manual always wins.
| Engine oil & filter | Every 5,000 miles or 6 months Use the oil grade and spec in your owner's manual. Some engines allow longer. |
|---|---|
| Tire rotation | Every 7,500 miles or 6 months Also a good time to check tread depth and pressures. |
| Brake inspection | Every 12,000 miles or 1 year Pads, rotors, lines and fluid level. |
| Cabin air filter | Every 15,000 miles or 1 year Sooner if the airflow smells musty or feels weak. |
| Engine air filter | Every 20,000 miles or 2 years Sooner on dusty or gravel roads. |
| Wiper blades | Every 1 year |
| 12V battery test | Every 3 years Most 12V batteries last 3 to 5 years. Test before winter. |
| 12V battery replaced | Every 5 years Most last 3 to 5 years. Heat and short trips wear them faster. |
| Tires (replace) | Every 50,000 miles or 6 years Tread depth and age matter more than miles. Replace at 2/32" of tread (4/32" if you drive in the rain a lot), or around 6 years old. The date code is on the sidewall. |
| Brake pads (replace) | Every 40,000 miles Replace when about 3 mm (1/8 in) of pad is left, or if you hear grinding. Rear pads usually last longer than front. |
| Brake rotors (replace) | Every 70,000 miles Replace below the minimum thickness stamped on the rotor, or if warped or deeply grooved. Often done with new pads. |
| Shocks & struts (replace) | Every 75,000 miles Worn ones cause bouncing, nose-dive when braking and uneven tire wear. Many last 50,000 to 100,000 miles. |
| Brake fluid flush | Every 30,000 miles or 2 years Brake fluid absorbs moisture over time. |
| Spark plugs | Every 60,000 miles Iridium or platinum plugs often go 100,000 miles. Check the manual. |
| Transmission fluid | Every 60,000 miles Interval varies a lot by transmission. Check the manual. |
| Coolant flush | Every 60,000 miles or 5 years Some long-life coolants go 100,000+ miles. |
| Serpentine belt | Every 90,000 miles Inspect for cracks at every oil change. |
| Timing belt (if equipped) | Every 90,000 miles or 7 years Skip if your engine has a timing chain. Check the manual. |
Safety recalls
NHTSA lists 3 recalls for the 2010 Mazda Mazda3. Recalls apply by model year, and not every vehicle of that year is affected. Check your own VIN at nhtsa.gov/recalls.
- SEATS (17V082000): Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter l…
- STRUCTURE:BODY:HATCHBACK/LIFTGATE (16V644000): Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 201…
- ELECTRICAL SYSTEM (09V126000): MAZDA IS RECALLING 25,400 MY 2010 MAZDA3 VEHICLES. A CLEARANCE BETWEEN THE ENGINE HARNESS AND THE HOUSING OF STARTER MOTOR MAY BE INSUFFICIENT. DUE TO THIS, THE COVERING OF THE HARNESS MAY BE DAMAGED THROUGH VIBRATI…
Other Mazda Mazda3 years
Parts Bench is a free tool for identifying a vehicle, tracking maintenance and finding parts. Open the app to save your vehicle and keep a maintenance log.
Links to eBay and other stores are affiliate links. We may earn a commission if you buy, at no extra cost to you. Parts Bench is not a store and does not sell parts. Always confirm fitment with the seller before you buy.