Parts Bench › Parts › 2012 BMW 3 Series › Lower Ball Joint
2012 BMW 3 Series Lower Ball Joint
Ball joints let the wheel move up and down and steer. A worn ball joint can fail and is a safety issue.
Compare lower ball joint for your 3 Series in the appSigns it may need replacing
- Clunking over bumps
- Wandering steering or uneven tire wear
- Visible play when the wheel is lifted and rocked
At a glance
| Part | Lower Ball Joint Suspension › Control Arms & Joints |
|---|---|
| Typical life | Often 70,000 to 150,000 miles. |
| DIY difficulty | Advanced Often needs a ball joint press, and an alignment afterward. |
Lifespans and difficulty are general. They vary with the engine, trim, driving and climate, and your owner's manual and a qualified mechanic should have the final say.
Before you buy
Some cars use a joint that is part of the control arm, so the whole arm is replaced. Check which type yours is.
Confirm the part fits your exact 2012 BMW 3 Series by checking your VIN, engine size and trim with the seller. The 3 Series was sold with different options across the 2012 model year, and a part that fits one build may not fit another.
Where to buy a 2012 BMW 3 Series lower ball joint
These searches are set up for your vehicle and the part.
Links to eBay and other stores are affiliate links. We may earn a commission if you buy, at no extra cost to you. Parts Bench is not a store and does not sell parts. Always confirm fitment with the seller before you buy.