Parts Bench › Parts › 2011 Saab 9-3 › Wheel Hub Assembly
2011 Saab 9-3 Wheel Hub Assembly
The hub assembly holds the wheel and includes the bearing on many cars. It also carries the ABS wheel speed sensor on many designs.
Compare wheel hub assembly for your 9-3 in the appSigns it may need replacing
- Humming or grinding that changes with speed or turning
- Looseness in the wheel
- An ABS light
At a glance
| Part | Wheel Hub Assembly Suspension › Wheel Bearings & Hubs |
|---|---|
| Typical life | Often 85,000 to 150,000 miles. |
| DIY difficulty | Intermediate A large axle nut and a sturdy breaker bar are needed. |
Lifespans and difficulty are general. They vary with the engine, trim, driving and climate, and your owner's manual and a qualified mechanic should have the final say.
Before you buy
Check whether your car needs the version with or without the ABS sensor, and replace the axle nut if it is a one-use type.
Confirm the part fits your exact 2011 Saab 9-3 by checking your VIN, engine size and trim with the seller. The 9-3 was sold with different options across the 2011 model year, and a part that fits one build may not fit another.
Where to buy a 2011 Saab 9-3 wheel hub assembly
These searches are set up for your vehicle and the part.
Links to eBay and other stores are affiliate links. We may earn a commission if you buy, at no extra cost to you. Parts Bench is not a store and does not sell parts. Always confirm fitment with the seller before you buy.